> UPS системи SOCOMEC > Трифазен вход / Трифазен изход SOCOMEC

Трифазен вход / Трифазен изход SOCOMEC

UPS MASTERYS IP+ (10 to 80 kVA)

from 10 to 80 kVA
High reliability in harsh industrial environments


Specially engineered to power and protect typical industrial equipments such as motors, motor speed drivers, lamps, non linear loads, welding equipments, power supplies, MASTERYS IP+ is also perfectly able to supply control equipments like programmable controllers, sensors and measurement apparatus and integrates perfectly into the most demanding industrial environments.

ADVANTAGES

A HIGH-QUALITY POWER SUPPLY

• High precision of the output voltage, whatever the type of load supplied.
• Possibility of supplying loads with a power factor of up to 0.9 leading, without de-rating the active power.
• High short-circuit current delivered by the UPS, simplifying the protection needed to ensure selectivity downstream

PROTECTION AGAINST SEVERE ENVIRONMENTAL CONDITIONS
• MASTERYS IP+ is integrated in a robust heavy steel frame enclosure.
• Standard protection degree is IP31 (protection against foreign solid objects of 2,5 mm diameter or greater, and protection against vertically falling water drops).
• This protection level can be increased for harsh environments up to IP52 -optional- (full protection from dust with easy replaceable air filters, and protection against water sprayed at an angle up to 15° from vertical).
• Furthermore, the electrical circuit boards can be coated on both sides to protect them from corrosive air particles (option).
• Floor anchoring to prevent tilting

GALVANIC ISOLATION
• Compact solution with insulation transformer, MASTERYS IP+ provides complete galvanic isolation between the upstream and downstream circuits.
• Therefore the equipment adapts perfectly to all upstream and downstream neutral point connections.


EASY INTEGRATION INTO INDUSTRIAL NETWORK
• Optimization the sizing of input protections, cables,    Generator sets and transformers thanks to IGBT rectifier (high input power factor > 0,99 and low input current harmonic distortion <3% )
• Fully compatible with Generator sets
• Wide input voltage tolerance from -40% up to +20% of nominal voltage to withstand the large voltage transients that can frequently happen on mains in the industrial environment
• Double immunity comparing to the requirement of UPS international standard IEC 62040-2, to further increase protection against electromagnetic disturbance.
• Compatible with Open vented Lead Acid, Valve Regulated Lead Acid (VRLA) and Nickel Cadmium Batteries
• True frontal access for input/output cabling, spares replacement and maintenance.

SCALABILITY
• MASTERYS IP+ offers Scalable power and high availability (using redundancy) with the facility to parallel up to 6 units.
• Preventive maintenance without process interruption

COST REDUCTIONS AND ENERGY ENVIRONMENTAL CONSIDERATIONS
• The high efficiency of the UPS reduces energy loss and the systems need for extensive air conditioning systems.

COMMUNICATING EQUIPMENT
• MASTERYS IP+ is equipped with user friendly multilingual interface with graphical display
• It provides flexible communication possibilities such as programmable volt-free contacts, enabling the remote reporting of status or alarm information.
• Another standard feature is a RS232 and RS485 serial link with JBUS/MODBUS protocols, which makes it possible to exchange the same information in addition to measurements taken by the UPS.
• Profibus and Devicenet protocols are also available (option).
A REASSURING TECHNICAL PRESENCE
• Ensured by our inspection and maintenance service, which is strategically located throughout the country.
• Our support staff is ready to advise and assist you with the activation, preventive maintenance and corrective maintenance of our systems

COST REDUCTIONS AND ENERGY ENVIRONMENTAL CONSIDERATIONS
• The high efficiency of the UPS reduces energy loss and the systems need for extensive air conditioning systems.

COMMUNICATING EQUIPMENT
• MASTERYS IP+ is equipped with user friendly multilingual interface with graphical display
• It provides flexible communication possibilities such as programmable volt-free contacts, enabling the remote reporting of status or alarm information.
• Another standard feature is a RS232 and RS485 serial link with JBUS/MODBUS protocols, which makes it possible to exchange the same information in addition to measurements taken by the UPS.
• Profibus and Devicenet protocols are also available (option).
A REASSURING TECHNICAL PRESENCE
• Ensured by our inspection and maintenance service, which is strategically located throughout the country.
• Our support staff is ready to advise and assist you with the activation, preventive maintenance and corrective maintenance of our systems

UNI VISION PRO software

MAIN CHARACTERISTICS

• shutdown command to the PCs/Servers connected in the network
• several operating systems supported
• notification of alarm messages via e-mail
• JNC (Java & .NET™ Shutdown Client) optional.

ADVANTAGES
COMPLETE AND EFFECTIVE PROTECTION
UNI VISION pro provides the system on which it is installed with full management and control of all sensitive UPS operating parameters and of the quality of the electric power supplying the equipment.

NET VISION
SNMP - Web manager

MAIN CHARACTERISTICS
• T-SERVICE, remote diagnostics functions with automatic sending of report and alarms via e-mail to the local authorised Socomec UPS Service Centre
• SNMP /HTTP agent for easy control of remote stations
• JNC (Java&.NET TM Shutdown Client) optional.

ADVANTAGES
EASY CONNECTION TO THE NETWORK

To be able to monitor and interact with the UPS from any PC equipped with an Internet Browser, just make a connection with NET VISION between the UPS and your company´s network. The UPS can then be managed like any other network peripheral.






Разгледай цялото продуктово направление »


Може да Ви интересуват и


Sharys IP

NET VISION софтуер

СТАНИ ПАРТНЬОР НА

DTS